Configure the IP address
Connect the network cable to the product and to the network.
Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
At the product control panel, press the Home button.
Open the following menus:
Connect to a network with Windows
Find the IP address on the Embedded Jetdirect page.
HP Color LaserJet
IPv4: If the IP address is 0.0.0.0, or 126.96.36.199, or 169.254.x.x, you must manually configure
the IP address. Otherwise, the network configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address.