Load Tray 2 or an optional 500-sheet tray
CAUTION:
To avoid jams, do not load trays while the product is printing.
CAUTION:
Do not fan the paper. Fanning can cause misfeeds.
1.
Pull the tray out and lift up slightly to remove it
from the product.
ENWW
Load paper trays
79
2.
Pinch the release lever that is located on the
left guide and slide the side guides to the
correct paper size.
3.
Pinch the release lever that is located on the
rear paper guide and slide it to the correct
paper size.
4.
Load the paper into the tray. Make sure that
the stack is flat at all four corners and that the
top of the stack is below the maximum-height
indicators.
5.
Slide the tray completely into the product.
80
Chapter 6 Paper and print media
ENWW