Configure the IP address
1.
Connect the network cable to the product and to the network.
2.
Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3.
At the product control panel, press the Home button.
4.
Open the following menus:
●
Administration
●
Reports
●
Configuration/Status Pages
●
Configuration Page
ENWW
Software for Mac
47
5.
Find the IP address on the Embedded Jetdirect page.
Jetdirect Page
HP Color LaserJet
Page 1
6.
IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually configure
the IP address. Otherwise, the network configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address.